It delivers a 40% increase in cooling capacity over stock cooling, and features a newly designed bracket with an easier installation process versus the Kraken G10.
Plus, the Kraken G12 is also compatible with more than 30 liquid coolers on the market.
HOW TO INSTALL THE KRAKEN G12 GPU MOUNTING KIT
Step 1: Prepare the Graphics Card
Remove the original cooling module from your graphics card.
Step 2: Prepare the GPU Bracket
Install the fan with the label facing the GPU bracket using the fan screws.
Attach the two foam pieces at the corners while making sure the foams will not interfere with components on the graphics card.
Step 3: Identify the Mounting Holes and Retention Brackets
Identify the correct mounting holes on the GPU bracket and prepare the required retention brackets for your graphics cards.
Step 4: Prepare the Retention Brackets
Mount the retention brackets using screws and washers to prevent risk of damage to your graphics card.
Step 5: Prepare the Pump
Referring to your liquid cooler’s instructions, remove the Intel or AMD retention bracket if it is already installed.
Step 6: Install the Pump onto the GPU Bracket
Orient the pump’s tubes along the side with cable tie points.
Pass the pump through the GPU bracket’s grooves.
Rotate the pump until it aligns with the GPU brackets and attach.
Step 7: Install the GPU Bracket
Using the thumb screws with spring, install the GPU bracket onto the graphics card.
Step 8: Manage the Tubes and Cables
Use the included cable ties to manage the tubes and cables along the trench with tie points.
Step 9: Connect the Fan
Connect the 3-pin fan connector to the liquid cooler’s fan power or to an open fan headers on the motherboard.
Step 10: Install the Assembled Graphics Card
Follow the liquid coolers instructions and complete all necessary connections to complete the installation of your graphics card. This can include pump power, USB, and software installation.
Subscribe for more how-to videos
Thank you for watching Builder’s Workshop and for installing the Kraken G12 GPU mounting kit.
Latest posts by NZXT (see all)
- #NZXTBUILDS: Project Sinestro S340 Elite by PC Crazy - June 14, 2017
- Introducing BLD – The Simplest Way to Get a Gaming PC - June 6, 2017
- How Closed-Loop Liquid Cooling Works - May 26, 2017